25
shocks. Never place the appliance on paper towels or uneven working areas. The air
has to able to circulate.
IMPORTANT: Always ensure that the plug is not connected to the power outlet
before assembling or disassembling the appliance. Place the mincer on a flat, dry
surface such as a bench top.
Assembling for mincing
1. Loosen the screw plug on the right side of the mincer
by turning it counterclockwise until you can fit the slim
end of the worm housing all the way into the opening for
the drive shaft. The opening of the worm housing should
bebupright (picture A). The worm housing is correctly
mounted when the worm housing is flush with the motor
housing. You should not be able to see the slim end of
the worm housing anymore.
Turn the screw clockwise for tightening. Do not use force
and be careful to not overwind the screw thread.
2. Insert the worm with the longer, narrower end into the
worm housing and turn slightly until it is securely seated
in the worm housing (picture B). Make sure that the worm
is placed completely in the inside of the worm housing.
If necessary turn the worm a little bit to make it fit. If
mounted correctly only round about 9mm of the axis of the
worm poke out of the worm housing.
3. Attach the needed accessories (in this case:
crossed-blade knife and grinding disc).
Take the crossed-blade knife and attach it to the worm.
The rounded side of the knife must face the worm when
attaching it to the axis of the worm. Ensure the square
opening of the crossed-blade knife fits over the four
cornered shaft of the worm (picture C and D).
ATTENTION: Ensure the rounded side of the knife
faces the worm when assembling it. Otherwise
it can cause damage to the motor.
WARNING: The blades of the crossed-blade knife are very
sharp. Pay attention when you handle the crossed-blade knife.
ATTENTION: Never use the crossed-blade knife and the grinding
disc together with the sausage filling attachment. How to work with
the attachments is explained further back in the instructions.
rounded side
A
B
C
D
E
41409_DesignFleischwolfAdvanced_Manual_GermanEnglisch3.qxp 02.06.2009 15:30 Seite 25
(32 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern